|
![](http://www.hantz.com/images/b.gif)
|
RS232 data transfer using ZigBee modules
|
|
ZigBee Serial Modules
Powerfull Modules for ZigBee Wireless Networks |
EZBee Serial Module
EZBee is a compact Zigbee single-board module which is compliant to the 2.45GHz Zigbee specification v1.0 of IEEE 802.15.4.
|
|
![](http://www.bluetoothupgrades.de/ziggbee/images/EZBee_module_01_thu.jpg) |
EZBee-DBK: Zigbee Evaluation Kit
EZBee Evaluation Kit (part no.: EZB-001EK) is the evaluation kit of EZBee, which is a compact Zigbee single-board module compliant to the 2.45GHz Zigbee specification v1.0 of IEEE 802.15.4.
|
|
![](http://www.bluetoothupgrades.de/ziggbee/images/zigbee_kit_thu.jpg) |
EZBee Serial Module
EZBee is a compact Zigbee single-board module which is compliant to the 2.45GHz Zigbee specification v1.0 of IEEE 802.15.4. With EZBee, users may enable Zigbee wireless network easily without a professional knowledge on Zigbee protocol. EZBee is designed to be used as a serial RF module to a Host system.
Part no.
|
Description
|
Version
|
Release Date
|
EZB-001
|
2.4GHz Zigbee Module
Short Range
|
VER.C.0.9.1
VER.R.0.9.0
VER.E.0.9.0
|
Sept 26, 2005
|
EZB-001EK
|
EZB-001 Evaluation Kit
|
VER.C.0.9.1
VER.R.0.9.0
|
Sept 26, 2005
|
EZBee- EZB-001
|
|
![](http://www.bluetoothupgrades.de/ziggbee/images/zigbee_net_ex.gif) |
Using AT commands provided, users may communicate with EZBee. Full AT commands available can be found in the user manual.
EZBee can be operated as coordinator, router and end-device. Coordinators and routers are FFD (Full functional Device), so can be communicated peer-to-peer without beacon. But End-device module is RFD (Reduced Functional Device), so can be working only with Coordinator and routers and can be configured to work as low power mode.
![](http://www.bluetoothupgrades.de/ziggbee/images/mechanicaldrawing1_small.gif)
Click for more information and prices! |
|
|
- IEEE 802.15.4 compliant PHY and MAC
- Full Function Device (FFD)
- 16 x 33.5 x 3.3 mm compact shield module for SMD mounting
- 128KB Flash memory, 4KB SRAM, 4KB EEPROM
- UART, SPI and JTAG interface
- 16 Channels in the 2.45GHz ISM band
- Up to 250kbps
- Integrated chip antenna or External Antenna options
- 2.7 ~ 3.6V supply voltage
- -30?C to 85?C operating temperature
- Conforms with ETSI EN 300 440 (Europe), FCC CFR-47 part 15.247 and 15.249 (USA), ARIB STD-T66 (Japan)
- Wireless remote control
- Building automation
- Personal area network
- Industrial control
- OEM equipment
- PC peripherals
Parameters
|
EZB-001
|
Performance
|
Range (LOS)
|
30m
|
Output Power
|
-25dBm~0dBm (1mW)
|
Data Rate
|
250Kbps
|
Receiver Sensitivity (PER=1%)
|
-94dBm
|
Power Requirements
|
Supply Voltage
|
2.7~3.6V
|
Tx Current (typical)
|
27mA
|
Rx Current (typical)
|
30mA
|
Power-down current
|
< 10uA
|
General
|
Operating Frequency
|
2.4~2.4835GHz
|
Dimensions
|
16 x 33.5 x 3.3 mm
|
Operating Temp.
|
-30¡ÆC ~ 85¡ÆC
|
Antenna Options
|
Integrated / External
|
Networking
|
Supported Network Topologies
|
Point-to-point, Point-to-multipoint, Mesh
|
Channels
|
16
|
Certifications
|
FCC/CE
|
Pending
|
EZBee-DBK: Zigbee Evaluation Kit
EZBee Evaluation Kit (part no.: EZB-001EK) is the evaluation kit of EZBee, which is a compact Zigbee single-board module compliant to the 2.45GHz Zigbee specification v1.0 of IEEE 802.15.4. With EZBee, users may enable Zigbee wireless network easily without a professional knowledge on Zigbee. EZBee is designed to be used as a serial RF module to a Host system.
Using AT commands provided, users may communicate with EZBee. Full AT commands available can be found in the User manual of EZBee (doc# EZB_manual_0927)
EZBee can be operated as coordinator, router and end-device. Coordinators and routers are FFD (Full functional Device), so can be communicated peer-to-peer without beacon. But End-device module is RFD (Reduced Functional Device), so can be working only with Coordinator and routers and can be configured to work as low power mode.
Datasheets and manuals:
EZBee DBK User Manual, PDF (476 k)
Part no.
|
Description
|
Version
|
Release Date
|
EZB-001
|
2.4GHz Zigbee Module
Short Range
|
VER.C.0.9.1
VER.R.0.9.0
VER.E.0.9.0
|
Sept 26, 2005
|
EZB-001EK
|
EZB-001 Evaluation Kit
|
VER.C.0.9.1
VER.R.0.9.0
|
Sept 26, 2005
|
![](http://www.bluetoothupgrades.de/ziggbee/images/zigbee_kit_upfront01_small.jpg)
EZB-001 Evaluation Kit
Click for more information and prices! |
|
|
Item
|
Number of articles
|
Evaluation Board (EZB-001EB)
|
2ea (1ea of Coordinator / 1ea of Router)
|
USB cable
(for power supply / configuration / test)
|
2ea
|
Description of Evaluation Board
|
|
[Order Info here]
|
|
|
|
|
|